The Norwegian

Appendix X

Conversion Tables

A technical reference covering exact SI conversions, operational diving approximations, gas relationships, buoyancy, navigation, workshop dimensions, and other units commonly encountered offshore.

This appendix brings together the conversion tables and working formulas most often needed in offshore, inshore, surface-supplied, saturation, chamber, construction, and subsea intervention work. Where practice uses simplified rules of thumb, those operational approximations are shown separately from exact unit conversions.

Editorial note: always label pressure clearly as bar(a), bar(g), ata, msw, fsw, or mfw as appropriate. Mixing absolute and gauge values is one of the fastest ways to introduce a dangerous error into a dive plan, chamber schedule, or gas calculation.

A.1

Symbols, conventions, and notation

The tables below distinguish exact SI conversions from operational shortcuts commonly used in offshore diving, chamber work, and subsea intervention. Pressure values should always be labelled clearly as absolute or gauge.

Symbols and notation
Unit / ExpressionEquivalent / Note
bar(a)Absolute pressure. Includes atmospheric pressure.
bar(g)Gauge pressure. Pressure above the local atmosphere.
ataAtmospheres absolute.
mswMetres of seawater. In diving, this is often used both as a pressure unit and as a depth expression. (Under the NORSOK diving convention, 10 msw = 1 bar = 100 kPa. Physical geometric seawater depth varies with density.)
fswFeet of seawater.
mfwMetres of freshwater.
ppO₂ / ppGasPartial pressure of oxygen or another constituent gas.
SAC / SRCSurface-normalised gas-consumption rate used for planning.
RMVRespiratory minute volume. Verify local company usage, as some organisations use RMV differently from SAC/SRC.
SGSpecific gravity, expressed relative to freshwater = 1.000.

A.2

Length, depth, distance, area, and capacity

Table A.2.1 — Length, depth, and distance
Unit / ExpressionEquivalent / Note
1 mm0.03937 in
1 cm0.39370 in
1 in25.4 mm
1 m3.28084 ft = 39.3701 in = 1.09361 yd
1 ft0.3048 m
1 yd0.9144 m
1 fathom6 ft = 1.8288 m
1 km0.53996 nautical miles = 0.62137 statute miles
1 nautical mile (nmi)1852 m = 1.852 km = 1.15078 statute miles
1 statute mile1609.344 m = 1.60934 km = 0.86898 nmi
1 cable185.2 m = 0.1 nmi
Table A.2.2 — Area, volume, and capacity
Unit / ExpressionEquivalent / Note
1 m²10.7639 ft²
1 ft²0.092903 m²
1 m³1000 L = 35.3147 ft³
1 ft³28.3168 L = 0.0283168 m³
1 L0.001 m³ = 0.0353147 ft³
1 US gallon3.78541 L
1 Imperial gallon4.54609 L
1 L0.26417 US gal = 0.21997 Imp gal
1 oil barrel158.987 L = 42 US gal
1 standard cubic metre (Sm³)35.3147 standard cubic feet (scf) (ft³) — for standard gas volumes, confirm the reference conditions.

A.3

Pressure and depth

Table A.3.1 — Exact pressure-unit conversions
Unit / ExpressionEquivalent / Note
1 bar100 kPa = 0.1 MPa = 100,000 Pa = 14.5038 psi = 750.06 mmHg
1 atm101.325 kPa = 1.01325 bar = 14.696 psi = 760 mmHg
1 mbar / 1 hPa0.001 bar = 100 Pa
1 kPa0.01 bar = 0.14504 psi
1 MPa10 bar = 145.038 psi
1 psi6.89476 kPa = 0.0689476 bar
1 mmHg0.133322 kPa
Table A.3.2 — Operational diving depth–pressure approximations
Unit / ExpressionEquivalent / Note
Surface1 bar abs ≈ 1 ata
10 msw2 bar abs ≈ 2 ata
20 msw3 bar abs ≈ 3 ata
30 msw4 bar abs ≈ 4 ata
40 msw5 bar abs ≈ 5 ata
50 msw6 bar abs ≈ 6 ata
100 msw11 bar abs ≈ 11 ata
150 msw16 bar abs ≈ 16 ata
200 msw21 bar abs ≈ 21 ata
250 msw26 bar abs ≈ 26 ata
300 msw31 bar abs ≈ 31 ata
Table A.3.3 — Useful depth and pressure notes
Unit / ExpressionEquivalent / Note
Operational seawater shortcutAdd approximately 1 bar for each 10 msw.
Operational feet-of-seawater shortcutAdd approximately 1 ata for each 33 fsw.
1 atm gauge≈ 10.08 msw ≈ 33.07 fsw
1 bar gauge≈ 9.95 msw ≈ 32.64 fsw
1 atm gauge in freshwater≈ 10.33 mfw
Approximate depth formulaPabs(bar) ≈ 1.013 + depth(msw) ÷ 10
Approximate fsw formulaPabs(ata) ≈ 1 + depth(fsw) ÷ 33

In commercial diving, msw and fsw are often treated as pressure units rather than literal geometric depth. Exact hydrostatic pressure varies with fluid density and local atmospheric pressure.

A.4

Gas laws, fractions, and partial pressure

Table A.4.1 — Gas-law and partial-pressure relations
Unit / ExpressionEquivalent / Note
Boyle's lawP₁V₁ = P₂V₂
Charles' lawV₁/T₁ = V₂/T₂ (temperature in kelvin)
Combined gas lawP₁V₁/T₁ = P₂V₂/T₂
Dalton's lawTotal pressure equals the sum of the partial pressures of the constituent gases.
Henry's lawThe quantity of gas dissolved in a liquid is proportional to the gas's partial pressure.
Partial pressureppGas = FGas × Pabs
Gas fractionFGas = ppGas ÷ Pabs
Gas percentageGas % = 100 × ppGas ÷ Pabs
Table A.4.2 — Selected oxygen-fraction examples
Unit / ExpressionEquivalent / Note
21% O₂ at 1 bar absppO₂ = 0.21 bar
21% O₂ at 2 bar absppO₂ = 0.42 bar
8% O₂ at 5 bar absppO₂ = 0.40 bar
6.67% O₂ at 6 bar absppO₂ = 0.40 bar
4.55% O₂ at 11 bar absppO₂ = 0.50 bar
3.64% O₂ at 11 bar absppO₂ = 0.40 bar
2.38% O₂ at 21 bar absppO₂ = 0.50 bar
1.90% O₂ at 21 bar absppO₂ = 0.40 bar

Gas percentages that look very low at storage depth can still produce entirely ordinary oxygen partial pressures. In saturation and chamber work, the partial pressure is usually the clinically relevant value.

A.5

Gas volume, cylinder capacity, and flow

Table A.5.1 — Gas volume and cylinder-capacity relations
Unit / ExpressionEquivalent / Note
1 L0.0353147 ft³
1 ft³28.3168 L
Cylinder free gas (approx.)Water volume (L) × pressure (bar)
10 L cylinder at 200 bar2000 L ≈ 70.6 ft³
12 L cylinder at 200 bar2400 L ≈ 84.8 ft³
15 L cylinder at 200 bar3000 L ≈ 105.9 ft³
12 L cylinder at 232 bar2784 L ≈ 98.3 ft³
Twin 12 L cylinders at 232 bar5568 L ≈ 196.6 ft³
Table A.5.2 — Gas-flow conversions and planning formulas
Unit / ExpressionEquivalent / Note
1 L/min0.0353147 ft³/min
1 ft³/min28.3168 L/min
1 L/s60 L/min = 2.11888 ft³/min
1 m³/h16.667 L/min = 0.58858 ft³/min
Actual gas use at depthSAC × Pabs
Surface-normalised gas useActual gas use ÷ Pabs
Time availableUsable free gas ÷ (SAC × Pabs)

Cylinder-capacity figures are approximate free-gas values. Precise capacity varies with temperature, compressibility, and the standard used for free-gas volume.

A.6

Mass, force, load, density, and buoyancy

Table A.6.1 — Mass conversions
Unit / ExpressionEquivalent / Note
1 g0.035274 oz
1 oz28.3495 g
1 kg2.20462 lb
1 lb0.453592 kg
1 tonne (metric)1000 kg = 2204.62 lb
1 short ton (US)907.185 kg = 2000 lb
1 long ton (Imperial)1016.05 kg = 2240 lb
1 tonne0.98421 long ton = 1.10231 short tons
Table A.6.2 — Force, load, and buoyancy
Unit / ExpressionEquivalent / Note
1 N0.22481 lbf = 0.10197 kgf
1 kN224.81 lbf = 101.97 kgf
1 lbf4.44822 N
1 kgf9.80665 N
1 tonne-force9.80665 kN = 2204.62 lbf
Buoyant forceρ × g × displaced volume
Apparent underwater loadDry load − buoyant force
Table A.6.3 — Density and specific gravity
Unit / ExpressionEquivalent / Note
1 g/cm³1000 kg/m³ = 62.428 lb/ft³
1 kg/m³0.062428 lb/ft³
Freshwater≈ 1000 kg/m³ = SG 1.000
Seawater≈ 1025 kg/m³ = SG 1.025
1 L displacement in freshwater≈ 1.000 kg buoyancy — supports approximately 1.000 kg of mass in freshwater, or ≈ 1.000 kgf buoyant force.
1 L displacement in seawater≈ 1.025 kg buoyancy — supports approximately 1.025 kg of mass in seawater, or ≈ 1.025 kgf buoyant force.

A.7

Speed, current, vertical rate, and time

Table A.7.1 — Speed and current
Unit / ExpressionEquivalent / Note
1 knot1.852 km/h = 1.15078 mph = 0.51444 m/s
1 m/s1.94384 kn = 3.6 km/h = 2.23694 mph
1 km/h0.53996 kn = 0.27778 m/s
1 mph0.86898 kn = 0.44704 m/s
0.25 kn0.1286 m/s
0.5 kn0.2572 m/s
1.0 kn0.5144 m/s
2.0 kn1.0289 m/s
3.0 kn1.5433 m/s
Table A.7.2 — Vertical rate and time
Unit / ExpressionEquivalent / Note
1 m/min3.28084 ft/min
1 ft/min0.3048 m/min
9 m/min29.5 ft/min
10 m/min32.8 ft/min
18 m/min59.1 ft/min
30 ft/min9.14 m/min
60 ft/min18.29 m/min
1 h60 min = 3600 s
1 day24 h = 1440 min = 86,400 s
0.1 h6 min
0.25 h15 min
0.5 h30 min
0.75 h45 min
0.1 min6 s
0.25 min15 s
0.5 min30 s

A.8

Temperature, navigation, medical units, and contaminants

Table A.8.1 — Temperature conversions
Unit / ExpressionEquivalent / Note
°C to °F(°C × 9/5) + 32
°F to °C(°F − 32) × 5/9
K to °CK − 273.15
°C to K°C + 273.15
0 °C32 °F
4 °C39.2 °F
10 °C50 °F
20 °C68 °F
30 °C86 °F
37 °C98.6 °F
Table A.8.2 — Navigation and position
Unit / ExpressionEquivalent / Note
1 minute of latitude1 nmi = 1852 m
1 degree of latitude60 nmi ≈ 111.12 km
1 second of latitude≈ 30.87 m
1 minute of longitude1 nmi × cos(latitude)
1 degree of longitude60 nmi × cos(latitude)
Decimal degreesDegrees + minutes/60 + seconds/3600
Longitude scale at 30° latitude1 minute of longitude ≈ 0.866 nmi
Longitude scale at 45° latitude1 minute of longitude ≈ 0.707 nmi
Longitude scale at 60° latitude1 minute of longitude ≈ 0.500 nmi
Table A.8.3 — Medical gas-pressure and contaminant units
Unit / ExpressionEquivalent / Note
1 kPa7.50062 mmHg
1 mmHg0.133322 kPa
1 bar750.06 mmHg
1 atm760 mmHg = 101.325 kPa
1%10,000 ppm
0.1%1000 ppm
0.01%100 ppm
1 ppm0.0001%
mg/m³ from ppmppm × molecular weight ÷ 24.45 (at 25 °C and 1 atm)
ppm from mg/m³mg/m³ × 24.45 ÷ molecular weight
CO₂ molecular weight44.01 g/mol
CO molecular weight28.01 g/mol
H₂S molecular weight34.08 g/mol
O₂ molecular weight32.00 g/mol
N₂ molecular weight28.01 g/mol
He molecular weight4.00 g/mol

For the ppm–mg/m³ conversion, the factor 24.45 corresponds to the molar gas volume at 25 °C and 1 atmosphere. If another reference temperature or pressure is used, the result changes.

A.9

Power, workshop dimensions, and common formulas

Table A.9.1 — Power, energy, torque, and rotational speed
Unit / ExpressionEquivalent / Note
1 kW1.34102 hp
1 hp / 1 mechanical hp0.74570 kW
1 kWh3.6 MJ
1 MJ0.27778 kWh
1 Btu1.05506 kJ — NIST lists different Btu definitions with slightly different joule values. The International Table calorie is 4.1868 J, so the exact International Table Btu is 1.05505585262 kJ.
1 N·m0.73756 lbf·ft
1 lbf·ft1.35582 N·m
1 rpm0.10472 rad/s
1 rad/s9.5493 rpm
1 Hz60 rpm
Table A.9.2 — Common fabrication and workshop dimensions
Unit / ExpressionEquivalent / Note
1/8 in3.175 mm
1/4 in6.35 mm
3/8 in9.525 mm
1/2 in12.7 mm
5/8 in15.875 mm
3/4 in19.05 mm
7/8 in22.225 mm
1 in25.4 mm
1¼ in31.75 mm
1½ in38.1 mm
2 in50.8 mm
Table A.9.3 — Operational formulas used repeatedly in diving work
Unit / ExpressionEquivalent / Note
Ambient pressurePabs = Psurface + ρgh* (in SI units, ρgh is in pascals; divide by 100,000 to express the result in bar.)
Operational seawater shortcutPabs(bar) ≈ 1.013 + depth(msw) ÷ 10
Operational feet shortcutPabs(ata) ≈ 1 + depth(fsw) ÷ 33
Partial pressureppGas = FGas × Pabs
Gas fraction requiredFGas = ppGas ÷ Pabs
Free gas in a cylinderApprox. cylinder volume × cylinder pressure
Actual gas useSAC × Pabs
Time from the cylinderUsable free gas ÷ (SAC × Pabs)
Buoyant forceρ × g × displaced volume
PowerForce × velocity

These tables are intended as a quick technical reference. They do not replace project procedures, company standards, statutory requirements, chamber manuals, dive tables, or the certified limits of a breathing gas system, launch and recovery system, or life-support installation.

The Norwegian

A four-volume autobiographical work spanning continents, disciplines, and decades. Editorial edition, published in print and online.